MDR HARDWARE 1

*** H A R D W A R E ***

MDR 120/240 volt AC powered Control Interfaces

MODEL: HCS

Switchable 120/240 volt AC powered Control Interfaces with 8 x contact closure sensing digital inputs and 8 x 8 amp isolated relay outputs with changeover contacts. The Interfaces are modular and consist of a passive backplane, with expansion sockets, field wiring terminals and fuses for each output relay, mounted in a lockable box. Plug-in Power Supply. Plug-in Board on which are mounted the relays, processor and all electronic components. Control by RS232 or via electricty mains (if plug-in mains modem option fitted).

Availability: now - further information

MODEL: DOM/ED

Selectable 120/240 volt AC powered Control Interfaces with 4 x contact closure sensing inputs and 4 x 8 amp isolated relay outputs with changeover contacts (not fused) contained in dual tone plastic case. Control via RS232.

Availability: now - further information
MDR 24 volt DC powered Control Interfaces

MODEL: FESTO

Compact 24 volt DC powered interface designed to fit FESTO PNEUMATIC VALVE MANIFOLDS but may be used in other situations. 16 x 24 volt DC input sensing channels per board with 8 x 0.5 amp 24 volt DC outputs (non-fused) per board.

For FESTO MANIFOLDS up to 2 boards may be fitted (32 inputs 16 outputs) on a backplane which plugs directly into the manifold. The backplane also accomodates a plug-in Power Supply module. Control via RS232.

Availability: now - further information
MDR 3 channel output RGB amplifier

3 way RGB amplifier for driving up to 3 VDU screens simultaneously up to 100 metres from source. Powered 240 volt AC. 6 way DIN socket outputs. DB23 input.

Availability: now - further information
MDR Mains Modem

Plug-in option for "HCS" type Control Interface (240 volt AC operation). Plug selectable computer or "slave" option. Operation and range dependent on local line conditions. RS232 pass through.

Availability: now - further information
MDR Digital Dimmer Unit

MODEL: DDU3

Bar mounted 16 bit Digital Dimmer with advanced features and bi-directional control. Switch selectable lighting curves. Selectable address for each channel. DMX-512 or local control with slider. Rigger port for control of complete system. 3 Phase or Single Phase supply with pass through reduces overall cabling requirements.

Availability: TBA - further information
MDR DMX512 - RS232 Lighting Control Interface

Intelligent Lighting Control Interface for DMX-512. Supplies self-generated DMX signal or monitors external DMX signal with pass through. Bi-directional DMX output allows for remote diagnosis of faults, e.g. lamp failure, circuit breaker status, remote switch settings, etc. Control or monitor via RS232 port.

Availability: TBA - further information

All clearance items are "as is" in new and unused condition, non-returnable, with 6 months return to base warranty for component failure.

Description	Model	Voltage	Price each ex-works excl VAT in GBP	Number available
"Nectaring" RS232 Mains modem DB25 sockets (used)		240 AC	POA	2
"Powernet" Addressable Mains modem RS232	300	240 AC	POA	3
MDR Control Interface 32 channel 12v Inputs + 32 channel 8 amp isolated c/o Outputs. RS232 control in 19 inch metal case	32IND-3U	240/120 AC	POA	2

order

X-10 EQUIPMENT

Please note that all MDR supplied X-10 equipment is to high UK specification and is CE approved. Only CE approved devices may be used in UK and EEC. Cheaper US devices and other non CE approved devices are not equivalent products and may not be used in the UK or EEC.

INET DIAL software is however compatible with all comparable X-10 devices.

Description - all CE Approved	Price in GBP excluding VAT	Secure online ordering
AMIGA COMPUTER X-10 INTERFACE - 3 pin square UK PLUG, RS232 to 9 PIN 'D' SOCKET AMIGA Cable	59.57	Order now!
9 PIN 'D' PLUG to 25 PIN 'D' SOCKET Type connector adaptor	6.80	Order now!
X-10 LAMP MODULE - 3 pin square UK PLUG with DIMMABLE SOCKET for 40 to 300 Watt max Lamps	25.52	Order now!
X-10 APPLIANCE MODULE - 3 pin square UK PLUG with 13 Amp switchable socket	25.52	Order now!
X-10 STARTER KIT - Amiga X-10 Interface + 1 Lamp Module + 1 Appliance Module	93.61	Order now!

Š2000 MDR Interfaces Ltd., Danehill, East Sussex, RH17 7JD , Great Britain / HARDWARE PAGE / INDEX PAGE /